Back view Back view with monitor stand
Label Description Use
1
VESA mounting holes (100 mm x 100 mm
- behind attached VESA Plate)
Wall mount monitor using VESA-compatible wall mount kit (100 mm x 100 mm) .
2 Regulatory label Lists the regulatory approvals.
3 Stand release button Release stand from monitor.
4 Security lock slot Secures monitor with security cable lock.
5 Dell Soundbar mounting brackets Attaches the optional Dell Soundbar.
6 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
7 USB downstream ports Connect your USB devices.
8 Cable management slot Use to organize cables by placing them through the slot.
Side View
To Next Page
Loading...
