Dell U2410 - Display Settings and Color Adjustments


Back
Touch  to go back to the main menu.






Display Settings

Wide Mode
Horizontal Position
Vertical Position
Sharpness
Noise Reduction
Zoom
Pixel Clock
Phase
Dynamic Contrast
Display Info
Reset Display Settings
Back
Use the Display Settings to adjust image.
Adjusts the image ratio as 1:1, Aspect or full screen.

NOTE: Wide Mode adjustment is not required at optimal preset resolution 1920 x 1200.
Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100' .
Improve the motion picture quality by reducing noise on image edge.
Use the Zoom function to zoom in to specific area of interest.
Using the and keys to zoom in and out.
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the and buttons to adjust for best image quality.
IfsatisfactoryresultsarenotobtainedusingthePhaseadjustment,usethePixelClock(coarse)adjustmentandthenusePhase(fine),again.

NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Allows youtoincreasethelevelofcontrasttoprovidesharperandmoredetailedimagequality.
Displays the monitor's current settings.
Select this option to restore default display settings.
Touch  to go back to the main menu.
PIP Settings

This function brings up a window displaying image from another input source.
PIP/PBP submenu when PIP/PBP OFF(mainsourceisVGA/DVI-Dinput)
PIP/PBP submenu when PIP/PBP OFF