EasyManua.ls Logo

Dell U2722D - Page 29

Dell U2722D
99 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
About Your Monitor | 29
Driver installation
Install the Realtek USB GBE Ethernet Controller Driver available for your system. This
is available for download at https://www.dell.com/support under the “Driver and
download” section.
Network (RJ45) data rate via USB-C max speed is 1000 Mbps.
NOTE: This LAN port is 1000Base-T IEEE 802.3az compliant, supporting
Mac Address (Printed on model label) Pass-thru, Wake-on-LAN (WOL)
from standby mode (S3 only) and PXE Boot function, these 3 features
depend on BIOS setting and OS version.
RJ45 Connector LED Status (U2722DE Only):
Left LED
Right LED
LED Color Description
Right LED Amber or Green Speed indicator:
• Amber On - 100 0 Mbps
• Green On - 100 Mbps
• Off - 10 Mbps
Left LED Green Link / Activity indicator:
• Blinking - Activity on the port.
• Green On - Link is being established.
• Off - Link is not established.
NOTE: RJ45 cable is non in-box standard accessory.

Table of Contents

Other manuals for Dell U2722D

Related product manuals