Setting Up the Monitor | 39
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow
the Safety Instructions.
To connect your monitor to the computer:
1. Turn o your computer.
2. Connect the HDMI/DisplayPort/USB cable, and the USB-C cable from your
monitor to the computer.
3. Turn on your monitor.
4. Select the correct input source from the OSD Menu on your monitor and then
turn on your computer.
NOTE: U2723QX/U2723QE/U3223QE default setting is DisplayPort 1.4.
A DisplayPort 1.1 Graphic card may not display normally. Please refer to
product specific problems – No image when using DP connection to the
PC to change default setting.
Connecting the HDMI Cable
(U2723QX (Inbox) / U2723QE/U3223QE (Optional))
To Next Page
