Dell U3824DW - Page 60

60  │  Operating the monitor
Auto Select for
USB-C
Allows you to set this function to:
• Pr
ompt for Multiple Inputs: Always displays the
“Switch to USB-C Video Input” message for you
to choose whether to switch or not.
• Ye
s: Always switches to USB-C video input
(without asking) when the USB Type-C cable is
connected.
• No: N
ever automatically switches to USB-C video
input when the USB Type-C cable is connected.
Press the joystick to confirm the selection.
NOTE: The
option is available only when Auto
Select is on.
Rename Inputs Allows you to specify a preset input name for the
se
lected input source. The preset options are PC,
PC 1, PC 2, Lapt
op, Laptop 1, and Laptop 2. The
default setting is Off.
NOTE: When y
ou perform a rename for the USB-C
input, the wattage value remains after the specified
option, e.g., PC 1
90W.
NOTE: It is no
t applicable for the input names shown
in the warning messages and Display Info.
Reset Input
Sour
ce
Resets your monitor input settings to the factory
settings.