78 │ Operating the monitor
When you change the default setting of power saving features for the first time,
such as Uniformity Compensation, USB-C Charging
90W, Other USB
Charging, or Fas
t Wakeup, the following message appears:
NOTE: If you select Yes for any of the features mentioned above, the
message will not appear the next time you change the settings of these
features. When you perform a factory reset, the message will appear
again.
You will see the following message before the Lo
ck function is activated:
NOTE: The message may be slightly different according to the selected
settings.
To Next Page
Loading...
