EasyManua.ls Logo

Dell VEP1400 Series - 4 Specifications; Chassis Physical Design

Dell VEP1400 Series
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specications
This section lists the VEP4600 specications.
CAUTION: Operate the product at an ambient temperature not higher than 0°C to 45°C (32°F to 113°F).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is incorrectly replaced. Replace only with same
or equivalent type of battery. Dispose of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see Restricted Material Compliance.
Chassis physical design
Table 1. Chassis physical design
Parameter Specications
Height 2.0 inches (50.8 mm)
Width 8.1 inches (205.74 mm)
Depth 7.9 inches (200.66 mm)
Chassis weight with factory-installed components
ATTENTION REVIEWERS:
Need verication on the chassis weight as it is not included in the
Source book yet.
TBD (no fan)
TBD (1 fan)
TBD (2 fans)
Table 2. Environmental parameters
Parameter Specications
Operating temperature 0–40°C (32°F–104°F) continuously
Operating humidity
5% to 85% (RH), noncondensing continuously
5% to 90% (RH), noncondensing short-term (< 1% of
operational hour per year)
Storage temperature –40° to 70°C (40° to 158°F)
Storage humidity 5% to 90% (RH), noncondensing
Maximum thermal output
ATTENTION REVIEWERS:
Need verication on the max thermal output as it is not included in
the Source book yet.
TBD
Maximum operational altitude No performance degradation to 5,000 ft (1,524 meters)
Maximum nonoperational altitude 35,000 ft (10,668 meters)
4
Specications 9
16,404
5,000

Related product manuals