Using Cards 73
The computer recognizes the media memory card and automatically loads
the appropriate device driver. If the configuration program tells you to load
the manufacturer's drivers, use the CD that came with the media memory
card, if applicable.
Removing a Media Memory Card
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
NOTICE: Use the media memory card configuration utility (click the icon in
the taskbar) to select a card and stop it from functioning before you remove it from
the computer. If you do not stop the card in the configuration utility, you could lose
data.
Press the card in to release it from the card reader so that it is partially ejected,
and remove the card.
1 media memory card slot 2 media memory card
1
2
book.book Page 73 Friday, October 19, 2007 2:03 PM
To Next Page
Loading...
