Dell Vostro 14-5459 - Installing the camera; Removing the system board

Installing the camera
1. Align the camera to the display panel .
2. Connect the camera cable to the camera.
3. Install the:
a. battery
b. back cover
c. display assembly
d. display bezel
4. Follow the procedure in After working inside your computer
Removing the system board
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. back cover
b. battery
c. heat sink
d. WLAN card
e. fan
f. display assembly
g. power connector
h. IO Panel
i. memory module
j. speakers
3. To remove the system board:
a. Disconnect the display assembly cable from the system board [1] [2].
b. Remove the screws that secure the system board to the computer chassis [3].
c. Lift and remove the system board from the computer.
21