Table 32. Storage
Options Description
SATA Operation
SATA Operation
This section allows the user to select the operating mode
of the integrated SATA hard drive controller. The following
options are available here:
● Disabled - SATA controllers are disabled.
● AHCI - SATA is configured in AHCI mode.
● RAID On - SATA is setup to support RAID (Intel Rapid
Storage Technology).
Storage Interface
Port Enablement
This section allows the user to enable or disable the onboard
drives on the computer. The following options are available
here:
● SATA-0
● M.2 PCIe SSD-0
SMART Reporting
Enable SMART Reporting
This section contains a toggle switch that allows the user to
enable or disable the S.M.A.R.T(Self-Monitoring, Analysis, and
Reporting Technology) option on the system.
Drive Information
This section provides information about the connected and
active drives on the computer.The following options are
available here:
● SATA-0
○ Type
○ Device
● M.2 PCIe SSD-0
○ Type
○ Device
Enable MediaCard
This section allows the user to switch all media cards On/
Off, or enable/disable the media card in read-state only. The
options seen are as below
● Secure Digital(SD) Card
● Secure Digital(SD) Card Read-Only Mode
Connection
This section provides connection details and settings.
Table 33. Connection
Options Description
Wireless Device Enable
This section contains a toggle switch that allows the user to
enable or disable WLAN and Bluetooth on the computer. The
options are as follows:
● WLAN
● Bluetooth
Enable UEFI Network Stack
This section contains a toggle switch that allows the user to
enable or disable installation of UEFI networking protocols.
30 System setup
To Next Page
Loading...
