About this task
The following images indicate the location of the coin-cell battery and provides a visual representation of the installation
procedure.
Insert the coin-cell battery into the socket with the positive side (+) labeled facing up and snap the battery in the socket.
Next steps
1. Install the side cover.
2. Follow the procedure in After working inside your computer.
M.2 2230 Solid state drive
Removing the 2230 solid-state drive
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. Remove the HDD/ODD bracket.
About this task
The following images indicate the location of the 2230 solid-state drive and provides a visual representation of the removal
procedure.
34
Disassembly and reassembly
To Next Page
Loading...
