SD card
Removing the media card reader
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the HDD/ODD bracket.
About this task
The following images indicate the location of the front cover and provide a visual representation of the removal procedure.
Steps
1. Unroute the PSU power cable from over the SD card reader.
2. Remove the two M3x5 screws securing the SD card reader to the chassis.
3. Lift and remove the SD card reader from the system board.
Installing the media card reader
Prerequisites
About this task
The following images indicate the location of the media card reader and provide a visual representation of the installation
procedure.
Disassembly and reassembly
41
To Next Page
Loading...
