4. Follow the steps below to remove the system fan:
a. Remove the screws that secure the system fan to the computer.
b. Remove the system fan from the computer.
Installing The System Fan
1. Place the fan on the computer.
2. Replace the screws to secure the fan to the computer.
3. Thread the system fan cable through the metal retention clips.
4. Connect the fan cable to the system board.
5. Install the:
• hard drive
• bezel
• cover
6. Follow the procedures in After Working Inside Your Computer.
Removing The Input/Output (I/O) Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the:
• cover
• bezel
• hard drive
• optical drive
18
To Next Page
Loading...
