3. system board 4. optical drive
5. I/O panel 6. system fan
7. hard drive 8. coin-cell battery
9. power supply unit (PSU) 10. expansion card
Removing The Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Follow the steps below to remove the cover:
a. Remove the screws that secure the cover to the computer.
b. Lift and remove the cover from the computer.
Installing The Cover
1. Place the cover on the chassis.
2. Replace the screws to secure the cover to the computer.
3. Follow the procedures in After Working Inside Your Computer.
Removing The Bezel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
9
To Next Page
Loading...
