Dell Vostro V 3800 - Removing The Input;Output (I;O) Panel

6. Follow the procedures in After Working Inside Your Computer .
Removing The Input/Output (I/O) Panel
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the:
– cover
– bezel
– hard drive
– optical drive
3. Follow the steps below to disconnect the I/O panel cables:
a) Disconnect the I/O panel and FlyWire cables from the system board.
b) Un-thread the cables from the metal retention clips.
4. Follow the steps below to remove the I/O panel:
a) Remove the screw that secures the I/O panel to the computer.
b) Slide the I/O panel outwards and remove it from the computer.
21