Dell W4200HD - Using Your TV with a Universal or Learning Remote Control

To Next Page

To Previous Page

24 Your Remote Control

www.dell.com | support.dell.com

FILE LOCATION: C:\Documents and Settings\solinak\Æ‡¦±\OM update\ch3e.fm

DELL CONFIDENTIAL – PRELIMINARY 10/8/04 – FOR PROOF ONLY

Using Your TV With a Universal or Learning Remote Control

Preprogrammed universal remote controls can be programmed to control the following functions

on your Dell TV:

•Power

• Channel Up (+)

• Channel Down (-)

• Volume Up (+)

• Volume Down (-)

• Mute

• Input Select

NOTE: Future preprogrammed universal remote controls may be able to control more functions.

You can program universal remote controls to work with your Dell TV in the following ways:

• If the remote control manual lists codes by manufacturer, use the Phillips codes.

• If the remote control has a search function, this function may be used to find the correct

code.

• If the remote control has a learning function, you can program specific buttons on it from the

Dell remote control, in addition to those buttons listed above.

NOTE: See the remote control documentation for specific instructions for your universal or learning

remote control.

DZ101_eUM.book Page 24 Friday, October 8, 2004 2:25 PM