Removing the headset port
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1. Remove the base cover.
2. Remove the battery.
Procedure
1. Remove the two screws (M2.5x4) that secure the left hinge to the palm-rest assembly.
2. Place the top surface of the computer on a flat and clean surface, then open and close the computer.
21
Removing the headset port 43
To Next Page
Loading...
