Table 7. System setup options—Integrated Devices menu (continued)
Integrated Devices
Enable Internal Speaker Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
USB configuration
Enable USB Boot Support Enable or disable booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
Enable External USB Ports Enable or disable booting from USB mass storage devices connected to external
USB port.
Table 8. System setup options—Storage menu
Storage
SATA/
SATA Configure operating mode of the integrated SATA hard drive controller.
Default: Disabled
Storage Interface Displays the information of various onboard drives.
M.2 PCIe SSD Enables or disables the M.2 PCIe SSD.
Default: ON
Drive Information Displays the information of onboard drives.
M.2 PCIe SSD Enables or disables the M.2 PCIe SSD.
Default: ON
Enable MediaCard Enables to switch all media cards On/Off or set the media card to read-only
state.
By default, Enable Secure Digital (SD) Card is selected.
Table 9. System setup options—Display menu
Display
Display Brightness
Brightness on battery power Sets the screen brightness when the computer is running on battery power.
Default: 50
Brightness on AC power Sets the screen brightness when the computer is running on AC power.
Default: 100
Touchscreen
Touchscreen Enables or disables the touchscreen.
Default: ON
Full Screen Logo
Full Screen Logo Enabled or disabled the computer to display full screen logo if the image match
screen resolution.
Default: OFF
66 System setup
To Next Page
Loading...
