5 Disconnect the antenna cables from the wireless card.
1 touch-screen cable
(optional)
2 camera cable
3 wireless-card bracket 4 screw
5 antenna cables 6 wireless card
7 tape
6 Remove the screw that secures the display cable to the I/O board.
7 Peel off the tapes that secure the display cable to the fan and the I/O
board.
8 Disconnect the media-card reader cable from the I/O board.
9 Note the display-cable routing and remove the cable from the routing
guides on the fan.
55
To Next Page
Loading...
