Resources Description
My Dell
Centralized location for key Dell applications, help articles, and other important information about your
computer. It also notifies you about the warranty status, recommended accessories, and software
updates if available.
SupportAssist
Proactively checks the health of your computer’s hardware and software. The SupportAssist OS The
recovery tool troubleshoots issues with the operating system. For more information, see the
SupportAssist documentation at www.dell.com/support.
NOTE: In SupportAssist, click the warranty expiry date to renew or upgrade your warranty.
Dell Update
Updates your computer with critical fixes and latest device drivers as they become available.
For more information about using Dell Update, see the knowledge base article SLN305843 at
www.dell.com/support.
Dell Digital Delivery
Download software applications, which are purchased but not pre-installed on your computer. For more
information about using Dell Digital Delivery, see the knowledge base article 153764 at
www.dell.com/support.
Views of XPS 15 7590
Front
1. Left microphone
Provides digital sound input for audio recording and voice calls.
2. Power and battery status light
Indicates the power state and battery state of the computer.
Solid white—The power adapter is connected and the battery is charging.
Solid amber—Battery charge is low or critical.
Off—Battery is fully charged.
3. Right microphone
Provides digital sound input for audio recording and voice calls.
Right
1. SD-card slot
Reads from and writes to the SD card.
2. USB 3.1 Gen 1 port with PowerShare
Connect peripherals such as external storage devices and printers.
Provides data transfer speeds up to 5 Gbps. PowerShare enables you to charge your USB devices even when your computer is turned off.
NOTE: If the charge on your computer’s battery is less than 10 percent, you must connect the power adapter to charge your computer, and USB
devices connected to the PowerShare port.
NOTE: If a USB device is connected to the PowerShare port before the computer is turned off or in hibernate state, you must disconnect and
connect it again to enable charging.
NOTE: Certain USB devices may not charge when the computer is turned off or in sleep state. In such cases, turn on the computer to charge the
device.
3. Battery-charge status lights (5)
Turn on when the battery-charge status button is pressed. Each light indicates approximately 20% charge.
4. Battery-charge status button
Press to check the charge remaining in the battery.
5. Security-cable slot (wedge-shaped)
Connect a security cable to prevent unauthorized movement of your computer.
Left
To Next Page
Loading...
