18 Setting Up and Using Your Computer
Connecting a USB Printer
NOTE: You can connect USB devices while the computer is turned on.
1
Complete the operating system setup, if you have not already done so.
2
Install the printer driver if necessary. See the documentation that came with your printer.
3
Attach the USB printer cable to the USB connectors on the computer and the printer. The USB
connectors fit only one way.
Using a Media Card Reader (Optional)
Use the Media Card Reader to transfer data directly to your computer.
The Media Card Reader supports the following memory types:
•xD-Picture Card
• SmartMedia (SMC)
• CompactFlash Type I and II (CF I/II)
• MicroDrive (mini SD and MS Pro Duo can be supported with an adapter)
• SecureDigital Card (SD)
• Mini SD Card
1 USB connector on computer 2 USB printer cable 3 USB connector on printer
2
1
3
To Next Page
Loading...
