Removing and Installing Parts 89
Floppy Drive (Optional)
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before
removing the cover.
Removing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page 61.
2
Remove the CD/DVD drive (see "Removing a CD/DVD Drive" on page 81).
3
Pull up on the drive release latch and slide the drive toward the back of the computer.
4
Carefully, so as not to damage the attached interface cable, lift the drive away from the computer.
1 drive release latch 2 floppy drive
1
2
To Next Page
Loading...
