140 Adding and Replacing Parts
b
Connect the battery cable to the connector on the system board.
6
Replace the keyboard.
7
Replace the hinge cover.
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1
Follow the procedures in "Before You Begin" on page 123.
2
Turn the computer over.
3
Remove the optical-drive security screw.
4
Insert a scribe into the notch and push it to the side to release the drive
from the bay.
5
Slide the drive out of the bay.
1 notch 2 optical-drive security screw 3 optical drive
2
3
1
To Next Page
Loading...
