Using Multimedia 71
1
Turn off the computer and the TV and/or audio device that you want to
connect.
NOTE: If your TV or audio device supports S-video but not S/PDIF digital
audio, you can connect an S-video cable directly to the S-video TV-out
connector on the computer (without the TV/digital audio adapter cable).
2
Plug one end of the S-video cable into the S-video output connector on
the computer.
3
Plug the other end of the S-video cable into the S-video input connector
on your TV.
4
Plug the single-connector end of the audio cable into the headphone
connector on your computer.
5
Plug the two RCA connectors on the other end of the audio cable into the
audio input connectors on your TV or other audio device.
6
Turn on the TV and any audio device that you connected (if applicable),
and then turn on the computer.
7
See "Enabling the Display Settings for a TV" on page 83 to ensure that the
computer recognizes and works properly with the TV.
1 standard S-video cable 2 standard audio cable
1
2
book.book Page 71 Monday, April 14, 2008 4:23 PM
To Next Page
Loading...
