Need help?Do you have a question about the Dell XPS 9Q33 and is the answer not in the manual?
General| Form factor | Convertible (Ferris Wheel) |
|---|---|
| Product type | Hybrid (2-in-1) |
| Product color | Grey, Silver |
| Drivers included | Yes |
| Operating system installed | Windows 8.1 |
| Operating system architecture | 64-bit |
| Internal memory | 4 GB |
| Memory clock speed | 1600 MHz |
| Memory form factor | On-board |
| Internal memory type | DDR3L-RS-SDRAM |
| LightScribe | No |
| SSD capacity | The Solid State Drive's storage capacity in Gigabytes. |
| Storage media | SSD |
| Total storage capacity | 128 GB |
| Number of SSDs installed | 1 |
| Pixel pitch | 0.144 x 0.144 mm |
| Display surface | - |
| Display diagonal | 12.5 \ |
| Display brightness | 400 cd/m² |
| Native aspect ratio | 16:9 |
| On-board graphics card ID | 0xA16 |
| Discrete graphics card model | Not available |
| On-board graphics card model | Intel® HD Graphics 4400 |
| On-board graphics card family | Intel® HD Graphics |
| Maximum on-board graphics card memory | 1.74 GB |
| On-board graphics card base frequency | 200 MHz |
| On-board graphics card DirectX version | 12 |
| On-board graphics card dynamic frequency (max) | 1000 MHz |
| Number of built-in speakers | 2 |
| Video capturing speed | 30 fps |
| Front camera resolution | 1280 x 720 pixels |
| Front camera resolution (numeric) | 1.3 MP |
| Charging port type | DC-in jack |
| USB 2.0 ports quantity | 0 |
| Number of SATA III connectors | 4 |
| Pointing device | Touchpad |
| Battery capacity | 47 Wh |
| Battery life (max) | - h |
| Number of battery cells | 6 |
| AC adapter power | 45 W |
| AC adapter frequency | 50 - 60 Hz |
| AC adapter input voltage | 100 - 240 V |
| AC adapter output current | 2.31 A |
| AC adapter output voltage | 19.5 V |
| Operating shock | 110 G |
| Operating altitude | -15.2 - 3048 m |
| Non-operating shock | 160 G |
| Operating vibration | 0.66 G |
| Non-operating altitude | -15.2 - 10668 m |
| Non-operating vibration | 1.3 G |
| Storage temperature (T-T) | -40 - 65 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 10 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Bus type | DMI2 |
| Stepping | D0 |
| Tjunction | 100 °C |
| Processor cache | 3 MB |
| System bus rate | 5 GT/s |
| Processor family | Intel® Core™ i5 |
| Processor series | Intel Core i5-4200 Mobile series |
| Processor socket | BGA 1168 |
| Processor codename | Haswell |
| Processor frequency | 1.7 GHz |
| Processor cache type | Smart Cache |
| Processor lithography | 22 nm |
| Processor manufacturer | Intel |
| Processor front side bus | - MHz |
| PCI Express slots version | 2.0 |
| Processor boost frequency | 2.7 GHz |
| PCI Express configurations | 4x1, 2x4 |
| Thermal Design Power (TDP) | 15 W |
| Processor code | SR1EF |
| Processor ARK ID | 81016 |
| Intel TSX-NI version | 0.00 |
| Processor package size | 40 x 24 x 1.5 mm |
| Intel ME Firmware Version | 9.5 |
| Supported instruction sets | AVX 2.0, SSE4.1, SSE4.2 |
| Intel Identity Protection Technology version | 1.00 |
Weight and Dimensions| Depth | 215.4 mm |
|---|---|
| Width | 317.3 mm |
| Weight | 1540 g |
| Height (rear) | 20 mm |
| Height (front) | 8 mm |
Steps to prepare the computer before performing internal component work.
Lists the specific tools required for internal component replacement procedures.
Guidelines to protect the computer from damage and ensure personal safety during maintenance.
Actions required before starting the battery removal procedure.
Actions required after completing the battery replacement procedure.
Actions required before starting the wireless card removal procedure.
Actions required after completing the wireless card replacement procedure.
Actions required before starting the mSATA card removal procedure.
Actions required after completing the mSATA card replacement procedure.
Actions required before starting the speaker removal procedure.
Actions required after completing the speaker replacement procedure.
Actions required before starting the coin-cell battery removal procedure.
Actions required after completing the coin-cell battery replacement procedure.
Actions required before starting the I/O board removal procedure.
Actions required after completing the I/O board replacement procedure.
Actions required before starting the fan removal procedure.
Actions required after completing the fan replacement procedure.
Actions required before starting the heat sink removal procedure.
Actions required after completing the heat sink replacement procedure.
Actions required before starting the power-adapter port removal procedure.
Actions required after completing the power-adapter port replacement procedure.
Actions required before starting the system board removal procedure.
Guide to enter the Service Tag after system board replacement.
Actions required before starting the display assembly removal procedure.
Actions required after completing the display assembly replacement procedure.
Actions required before starting the display back-cover removal procedure.
Actions required after completing the display back-cover replacement procedure.
Actions required before starting the camera module removal procedure.
Actions required after completing the camera module replacement procedure.
Actions required before starting the Windows-button board removal procedure.
Actions required after completing the Windows-button board replacement procedure.
Actions required before starting the display panel removal procedure.
Actions required after completing the display panel replacement procedure.
Actions required before starting the keyboard removal procedure.
To Next Page
