Delmhorst F-2000 - Change the Set-Point

CHANGE THE SET-POINT
hTo change the set-point value press the set-point button
$. The meter will display the current set-point value.
hTo scroll forward to a higher value, hold the set-point
button
$ while the current value is displayed and scroll
to the set-point value desired.
hTo scroll backward through the set-point values, press and
release the set-point button
$. Within one second press
and hold the set-point decrease button
#.
hContinue to hold the set-point decrease button
# and the
set-point value will decrease.
hWhen scrolling in either direction, release the button to
stop at your desired set-point.
If the meter reads a %MC higher than that of the set-point,
a buzzer will sound.
4
F-2000 owners manualB&W:F-2000 owners manual out 4/8/09 3:18 PM
Delmhorst® F-2000 Digital Hay Moisture Tester Package, C16283 • enasco.com/farmandranch/