Delmhorst FX-2000 - Table of Contents

TABLE OF CONTENTS
2 FX-2000 Features
3 Before You Begin
3 To Use Meter In The Portable Mode
3 Check Calibration
4 Change the Set-Point
4 To Check Accumulated Readings
5 To Operate The Backlight
6 To Reset Meter
6 Taking a Reading
6 Testing Baled Hay
6 Notes
7 Testing in the Windrow
8 Factors Affecting Your Reading
9 Range of Moisture Content
9 Hay Temperature
10 Curing
10 Density
10 Use of Preservatives
11 Sample Size
11 To Use Meter For Continuous Monitoring
12 To Install The #1986 Bale Sensor
13 Installation on an Inline or Center Line
Small Square Baler
13 Installation on a Large or Mid-size Baler
13 Installation on a John Deere Round Baler
14 Installation on a New Holland or Case RBX
Round Baler
14 Installation on all other
Round Balers
15
To Use Meter in the Continuous Mode
15
About Your Readings
16 Care of Your Meter
1
6 Warranty
FX-2000 B&W manual:FX-2000 B&W manual 50406Q5 12/10/08 8:57 A