DeLonghi CF 1130 User Manual

GB
19
Preparing for use
2) The external unit can be hung on a wall
using the mounts supplied. In this case,
proceed as follows:
a) Fix the mounts to the wall, making sure
they are positioned as shown in the figure.
b) Hook the external unit to the mounts and
fix with the screws provided.
3) Alternatively, to install temporarily, the
external unit can be hung as follows:
a) Attach the mounts to the external unit and
fix them using the screws provided.
b) Attach the belts to the mounts.
c) Attach the other end of the belts securely.
The external unit can be installed on the
same level as the internal unit or higher, provi-
ded the difference in height does not exceed
1.5 m.
The air intake and outlet grilles of the external
unit must always be kept free. Condensate
forming during air conditioning (summer
mode) is eliminated through evaporation
from the external unit.
Important:
The external unit must be protected from
rain and bad weather.
In particular cases of exceptionally high humi-
dity, the condensate must be eliminated
using the condensate drain hose (after remo-
ving the rubber cap).

DeLonghi CF 1130 Specifications

Internal Unit Dimensions

width	480 mm
height	840 mm
depth	300 mm
weight	44 kg

External Unit Dimensions

width	450 mm
height	450 mm
depth	300 mm
weight	18 kg

Operating Environment

room temperature for air conditioning	21 - 32°C