23
ELECTRONIC PROGRAMMER
The electronic programmer is a device which groups together the following functions:
• 24 hours clock with illuminated display
• Timer (up to 23 hours and 59 minutes)
• Program for automatic oven cooking
• Program for semi-automatic oven cooking
Description of the buttons:
Timer
Cooking time
End of cooking time
Simultaneously: Switching to
manual and program reset.
To increase the numbers on
the digital display
To decrease the numbers on
the digital display.
Description of the illuminated
symbols:
A
ashing - Programmer in
automatic position but not
programmed
A
illuminated - Programmer in
automatic position with program
inserted.
Automatic cooking taking place
Timer in operation
and A - ashing - Program error.
(The time of day lies between the
calculated cooking start and end
time).
Note:
Select a function by the respective button
and, in 5 seconds, set the required time
with the
/ buttons (“one-hand”
operation).
After a power cut the display resets to
zero and cancels the set programs.
Caution: If the electricity supply is cut
off (the display numbers will ash), the
clock will reset and all the programs
entered will be cancelled.
A
Figure 16
To Next Page
Loading...
