16
TILTING GRILL
■ The grill is secured to the rear wall of the oven on a hinge system that allows it to be
lowered to allow proper access when cleaning the oven ceiling (g. 13).
■ To lower the grill element: use a at-head screwdriver or a small coin to loosen the
element xing screws g. (12).
■ When you have nished cleaning the oven ceiling, raise the grill element and screw
the element xing screws back onto the studs. Make sure that the xing screws are
tightened and the element is held securely in place.
■ The grill element itself is self-cleaning.
Figure 12
Figure 13
To Next Page
Loading...
