4
WARNING This appliance must be earthed.
CAUTION:
■ In order to avoid a hazard this appliance must be installed
according to these instructions for installation.
INSTALLATION
ELECTRICAL REQUIREMENTS
■ Connection to the mains must be carried out by qualified personnel in
accordance with current regulations.
■ The appliance must be connected to the mains checking that the voltage
corresponds to the value given in the rating plate and that the electrical
cable sections can withstand the load specified on the plate.
■ The appliance must be connected directly to the mains placing an omnipolar
switch with minimum opening between the contacts of 3 mm between the
appliance and the mains.
■ The power supply cable must not touch the hot parts and must be
positioned so that it does not exceed 75°C at any point.
■ Once the appliance has been installed, the switch or socket must always be
accessible.
■
If the power supply cable is damaged it must be substituted by a suitable
cable available in the after sales service.
To Next Page
Loading...
