Doc. nr.: DSDL_21010_A
[13]
If you want to change the type of coffee
You must remove all the beans present in the
machine
•
Empty the beans container (A3) (if nec- essary,
operate the coffee mill without
beans or use
a vacuum cleaner to re- move any
remaining beans)
•
Attach the portafilter (C1) and operate the
coffee mill a number of times with- out beans
to free the grinder. Attach the portafilter to
the outlet of the grinder
(A13). Push the
portafilter to start
grinding: it stops
automatically. Repeat until the filter is empty
•
Place the new coffee in the beans
container
•
If the amount of coffee ground is not
enough to reach the perfect dose, pro-
ceed
setting the appliance as for the
first use
After grinding, the coffee filter is empty
The coffee grinder funnel is clogged
See section “6. Cleaning the grinder”.
After grinding, the ground coffee in the
filter
(C3) or (C4) does not reach the
“perfect
dose”
The quantity of ground coffee needs
adjusting
Adjust the quantity of coffee with the dial
(B4). If
the dial is already in the max. position,
select the
second range of grinding adjust-
ment (see “3.
Menù settings”- “Extra grinding
adjustment”).
You are using the 2 cup filter (C4)
Make sure the 2X light is on
Over time the burrs wear down
Address to a Customer Service Centre to
change burrs.
To Previous Page
