What to do if my DeLonghi EO241250 Oven will not switch ON?
First, ensure the power plug is correctly inserted into the wall outlet. If it is, try a different outlet. Also, check the circuit breaker. If it still doesn't switch on, the oven may have a malfunction, and you should contact De'Longhi customer service.
What to do if my DeLonghi EO241250 Oven lamp is OFF while oven is ON?
If the oven lamp is off while the oven is on, the bulb may be broken, so replace it. Alternatively, the bulb may not be properly screwed into its housing; verify that it is completely screwed in. If the issue persists, there may be a malfunction, and you should contact De'Longhi customer service.
What to do if my DeLonghi Oven shows E0:21 Err?
If your DeLonghi oven displays an E0:21 error, record the error number. Then, reset the control by pressing the START/STOP button for 2 seconds and disconnect the plug from the wall outlet. First, ensure the oven door was closed during use, as an open door can prevent the oven from reaching the target temperature. If the door was closed, the heating elements might be damaged. Contact De’Longhi customer service, reporting the error number.
What does E0:27 Err mean on my DeLonghi EO241250 and how to fix it?
If your DeLonghi oven shows E0:27 Err, record the error number, reset the control by pressing the START/STOP button for 2 seconds, and disconnect the plug from the wall outlet. This error can appear if the oven starts the DEFROST function while still warm from previous use. Allow the oven to cool down before using the DEFROST function. If this isn't the case, the electronic control may be damaged. Contact De’Longhi customer service, reporting the error number.
What does E0:22 Err mean on my DeLonghi EO241250 and how to fix it?
If your DeLonghi oven displays the error code E0:22, record the error number. Then, reset the control by pressing the START/STOP button for 2 seconds and disconnect the plug from the wall outlet. The electronic control might be damaged. Contact a De’Longhi customer service, reporting the error number.
What does E0:11 Err mean on my DeLonghi EO241250 and how to fix it?
If your DeLonghi oven displays the error code E0:11, record the error number. Then, reset the control by pressing the START/STOP button for 2 seconds and disconnect the plug from the wall outlet. The temperature probe needs to be replaced. Contact a De’Longhi customer service, reporting the error number.
What does E0:12 Err mean on my DeLonghi Oven and how to fix it?
If your DeLonghi oven displays the error code E0:12, record the error number. Then, reset the control by pressing the START/STOP button for 2 seconds and disconnect the plug from the wall outlet. The temperature probe needs to be replaced. Contact a De’Longhi customer service, reporting the error number.
General| Type | Electric Oven |
|---|---|
| Capacity | 24 liters |
| Interior Light | Yes |
| Thermostat | Yes |
| Voltage | 220-240V |
| Frequency | 50-60Hz |
| Door | Double glass |
| Functions | Convection, Grill |
| Timer | 120 minutes |
Essential guidelines for safe electrical connection and grounding.
Crucial safety rules to follow during appliance operation.
Details on voltage, power, and overall size of the appliance.
Identifies appliance parts and explains display indicators.
Steps for initial setup, placement, and first use procedures.
Solutions for error codes and procedures for setting the clock.
How to select functions, set parameters, and start cooking.
Instructions for toasting and baking, including settings.
Instructions for convection and broil/grill modes.
Guidelines for cleaning the oven's interior, exterior, and accessories.
Solutions for common problems like error messages and operational failures.
To Next Page
