14
TILTING GRILL OF THE OVEN
■ The grill is secured to the rear wall of the oven on a hinge system that allows
it to be lowered to allow proper access when cleaning the oven ceiling
(fig. 15b
).
■ To lower the grill element: use a flat-head screwdriver or a small coin to
loosen the element fixing screw (fig. 15a).
■ When you have finished cleaning the oven ceiling, raise the grill element and
screw the element fixing screw back onto the stud.
■ Make sure that the fixing screw is tightened and the element is held securely
in place. The grill element itself is self-cleaning.
Figure 15a
Figure 15b
Fixing screw
Stud