DeLonghi MULTIFUNCTION BUILT-IN OVENS Installation And Service Instructions Use And Care Instructions

16
To remove the telescopic sliding shelf supports:
– Remove the side racks and the catalytic liners by unscrewing the fixing screws
(Fig. 17).
– Lay down the telescopic sliding shelf support and side racks, with the telescopic
sliding shelf support underneath.
– Find the safety locks. These are the tabs that clip over the wire of the side rack
(arrow 1 in Fig. 18).
– Pull the safety locks away from the wire to release the wire (arrow 2 in Fig. 18).
1
2
1
Cleaning the sliding shelf supports
– Wipe the supports with a damp cloth and a mild detergent only.
– Do not wash them in the dishwasher, immerse them in soapy water, or use oven
cleaner on them.
Figure 18
Figure 17

DeLonghi MULTIFUNCTION BUILT-IN OVENS Specifications

General

Brand	DeLonghi
Model	MULTIFUNCTION BUILT-IN OVENS
Category	Oven
Language	English