3 sec.
3 sec.
INFORMATION: follow the steps 1-8 of section «Preparing Cappuccino and Latte Macchiato».
信息:請 按 照「 調 製 Cappuccino及Latte Macchiato」第 1-8個步驟
1. Touch and hold Cappuccino/ Latte Macchiato/ Warm Warm
milk froth button for at least 3 sec. Milk frothing starts. Button
blinks fast: programming mode.
1. 長按Cappuccino/Latte Macchiato/暖奶泡按鈕至少
3秒,開 始 製 作 奶 泡 。按 鈕 燈 快 速 閃 動 :預 設
模式。
PROGRAMMING QUANTITY FOR CAPPUCCINOLATTE MACCHIATOWARM MILK FROTH/
預設CAPPUCCINOLATTE MACCHIATO-暖奶泡的份量
3. Touch and hold the same button. Brewing starts. Release
button when desired coee volume is reached. Recipe volume
is now stored for the next preparations. Button blinks 3 times to
conrm the new water volume.
3. 長 按 同 一 按 鈕 。開 始 沖 調 。直 至 達 至 所 想
份量才放開按鈕。食譜份量設定現已被儲存
作 下 次 調 製 之 用 。按 鈕 閃 燈 3次以確定新的食
譜份量。
2. Release button when desired milk froth volume is reached.
Button still blinks fast: programming mode. (Cappuccino/Latte
Macchiato). When programming the Warm milk froth beverage,
the programming ends here.
2. 直至達至所想奶泡份量才放開按鈕。按
鈕燈繼續快速閃動:預設模式(Cappuccino/Latte
Macchiato)。當預設暖奶泡飲品,預設已在此完
成。
NOTE: please refer to «Factory settings» section for
min/max programmable quantities.
注意:請參照原廠設定最少/最多份量的
內容。
NOTE: the milk froth volume depends on the kind of
milk that is used, its temperature and the position of the
milk regulator knob.
注意:牛奶泡沫之份量視乎所使用之牛奶
種類、其溫度及牛奶旋鈕的位置。
19
7484_UM_LATTISSIMA_RESTYLE_Z3B.indb 19 23.09.14 10:34