DeLonghi Nescafe Dolce Gusto ECLIPSE - 5. FIRST USE; Initial Setup and Power Connection; Rinsing Cycle Procedure

9
AUTO
5. FIRST USE
7
8
4
5
6
1
2
3
Start rinsing with cold water: Set bar display to
max. level with touch volume selector. Touch
cold water icon. Machine starts rinsing.
Make sure that rinsing tool is placed in capsule
holder and capsule holder is in machine. Place
an empty large container underneath the cof-
fee outlet.
Waituntilcountdownisnishedandmachine
stops.
Waituntilcountdownisnishedandmachine
stops.
Continue rinsing with hot water: Set bar
display to maximum level with touch volume
selector. Touch hot water icon. Machine starts
rinsing.
Remove rinsing tool. Warning: Hot water!
Handle with care! Emptycontainer.Rell
water tank with fresh drinking water. Insert
water tank back into machine. Place drip grid
on drip tray. Reinsert drip tray.
While machine is heating up, ON / OFF icon
starts blinking red. After approx. 30 seconds,
ON / OFF icon lights up steady green and
machine is ready.
Rinse water tank manually with fresh drinking
water. Fill water tank with fresh drinking water.
Insert water tank into machine.
Ensure to use the correct mains voltage as given
in “2. OVERVIEW“ on page 5. Connect power
plug to mains power socket. Press ON / OFF
icon. Machine moves automatically to beverage
preparation position.
9