12
9
1. Disassemble the milk carafe. Refer to section “Disassembling of milk ca-
rafe”.
2. If a dishwasher is available: place all milk carafe components in the upper
part of your dishwasher.
If a dishwasher is not available: soak all components in hot potable water
(50°C / 122°F) together with a mild detergent for at least 30 minutes; then
rinse thoroughly with hot potable water (50°C / 122°F). Do not use scented
detergents.
8
Cleaning the milk carafe
The procedure must be performed aer each use. Dishwashing is recom-
mended. When a dishwasher is not available, the milk carafe components can
be washed by hand.
or
*
3. Clean the interior of the milk carafe, the milk spout and the knob with a mild
detergent and rinse with hot potable water.
* Make sure the Air inlet is clean, this will ensure recipe quality cup aer cup.
Do not use abrasive material that might damage the surface of the equip-
ment.
4. Dry all six components with a clean cloth and reassamble. Refer to section
“Assembling of milk carafe”.
Aer cleaning the milk carafe , if you still have issues with your milk frothing
performance, please proceed with a second rinsing cycle by turning the knob
to the rinsing position.
To Next Page
Loading...
Need help?
General
