EasyManua.ls Logo

DeLonghi NF90 - Operation; Turning the Appliance on; Air-Conditioning Mode

DeLonghi NF90
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Operation
TURNING THE APPLIANCE ON
Plug the appliance into the mains.
Press the ON/OFF button (A) (when turned on, the air conditioner starts operating in the same
mode as when it was turned off).
The display shows the room temperature.
Press the MODE button (B) until the indicator light corresponding to the required mode lights up:
Light (O): air-conditioning mode
Light (N): fan mode
Light (P): dehumidifying mode
AIR-CONDITIONING MODE
Ideal for hot humid weather when you need to cool and dehumidify the room.
To set operation of the appliance correctly, press the + (E) or - (F) buttons until the desired tem-
perature is displayed (to change from °F to °C degrees or viceversa, press for few seconds both
buttons E and F).
Then select the fan speed by pressing the FAN button (C) until the indicator light corresponding to
the required fan speed lights up:
HIGH: the air conditioner operates at maximum to reach the required temperature as rapidly as
possible
MED: reduces noise levels but still maintains a good level of comfort
LOW: for silent operation
The most suitable temperature for the room during the summer varies from 75°to 81°F (24 to 27°C)
You are recommended, however, not to set a temperature much below the outdoor tempera-
ture.

Related product manuals