12
S
LEEP FUNCTION (FIG. 22)
This function is useful for the night as it gradually reduces opera-
tion of the appliance.
To set this function correctly:
•Press the button.
The SLEEP function maintains the room at optimum temperature
without excessive fluctuations in either temperature or humidity
and with silent operation.
In air conditioning or dehumidifying, fan speed is always at mini-
mum, while room temperature and humidity vary gradually to
ensure the most comfortable conditions.
During air conditioning, the temperature increases by 1°C after
60 minutes and a further degree after 2 hours.
In dehumidifying mode, the dehumidifying capacity is partially
reduced evry hour, two times.
In heating mode, the temperature drops by 1°C every hour, three
times.
In SMART mode, the temperature varies according to the opera-
ting mode chosen automatically by the appliance from air con-
ditioning, fan and heating.
S
WING FUNCTION (FIG. 23)
The SWING function moves the grille flaps to distribute the air uni-
formly in the room.
When the SWING button is pressed and the flaps have begun
moving alternately forwards and backwards, pressing the button
again will lock the flaps in their current position.
Pressing the button again will restart the flaps moving forwards
and backwards.
When the appliance is turned off, the flaps will close irrespective
of their position.
22
23
To Next Page
Loading...
