Delphi Connect - Install Your Module

10
Step 4: Install Your Module
Use your Verizon Wireless smartphone to check that
you have a strong signal where your vehicle is parked.
Don’t have Verizon coverage?
Visit Verizon’s interactive coverage map:
verizonwireless.com/maps.
• Makesureyourvehicleisparkedoutsideinasafe
location and the engine is turned off.
• NowplugthemoduleintotheOBDport(orintothe
extension cable if it is required). Make sure that
the module is fully seated.
• WaitfortheStatusLEDtoturnsolidblue.
For Helpful Installation
Tips – (See verizonwireless.com/delphiconnect)