6
• A supported vehicle identified in the fitment
guide connectedcar.delphi.com/fitment.
• Relocation Kit* if required.
• An activated module with a qualified Verizon
Wireless service plan.
If you do not have a Verizon Wireless service plan or
activated module, please visit verizonwireless.com/
activatedevice to activate this product before starting
installation. When asked for Device ID enter the ESN
DEC found on the label of the module.
• Use your Verizon Wireless smartphone to check
that you have a strong signal where your vehicle is
parked.
Don’t have Verizon coverage? Visit Verizon’s
interactive coverage map: verizonwireless.com/maps.
• Make sure your vehicle is parked outside in a safe
location and the engine is turned off.
*Sold Separately
Installation Requirements