Delphi Connect - Page 14

12
• Waitanadditional10secondsfortheLEDtogo
out.
• WhentheLEDbeginstoashblueevery10
seconds, setup is complete.
Stop! Do not proceed if the Status LED never
turned green but instead returned to solid blue.
Your vehicle may not be compatible with the Delphi
Connect system (check fitment guide connectedcar.
delphi.com/fitment) or you did not place the ignition in
the On position.
NOTE: The first time the module connects to the Verizon network, it will
perform a one-time network setup which will take several minutes.
NOTE: To avoid any unnecessary drain on the vehicle battery, it is
recommended to not leave the module in the solid blue state for more
than 24 hours.