Delphi Connect User Manual

15
In the event that you need to bring your vehicle in for
service or to have it inspected, where the OBD port
needs to be accessible, it is recommended that your
remove the module from your OBD port.
In order to re-pair your module with your vehicle please
refer to page 11 and follow steps 5 and 6. Anytime
the module is removed from the OBD port, these
instructions should be followed.
Module Removal & Re-Pairing Procedure
Finish Setup Using the Delphi Connect App

Delphi Connect Specifications

General

Brand	Delphi
Model	Connect
Category	Diagnostic Equipment
Language	English