Delphi Connect User Manual

17
Key Fob Setup Requirements
Pair Key Fob with Your Module
• Select MENU by tapping the Delphi icon in the
Delphi Connect app. Tap the Key Fob menu option.
• When prompted to configure the key fob, tap YES
and follow the prompts.
Following successful pairing of your module’s key
fob feature, you should be able to use your Delphi
Connect app to send key fob commands over the
Verizon Network to your vehicle in the same manner
as you would with your manufacturer’s key fob. In
addition, you can also use the website to send key
fob commands to your vehicle with your Internet
connection. Setup is complete and you may proceed
to Application & Service Features unless you would
like to setup Bluetooth connectivity between your
smartphone and your module.
Key Fob Setup

Delphi Connect Specifications

General

Brand	Delphi
Model	Connect
Category	Diagnostic Equipment
Language	English