Delphi Roady SA10035 User Manual

3. Press and hold the number key corresponding to the preset you would
like to set. The receiver will beep to indicate that the preset is registered.
4. Pressing a number key in preset mode without having saved a number
to that preset will cause the Roady to display the number and then
switch to Channel 1.
Preview and select channels using the Tuning Wheel
You can use your Roady to preview the XM channel lineup, see what
is currently playing, and then decide if you want to leave your current channel.
1. Roll the Tuning Wheel up or down repeatedly (hold to move quickly) to
scroll through the channel lineup.
2. Select a channel by pressing the Tuning Wheel in. If you do not select
a channel, the display will time out and return to the channel you are
listening to.
Tune to a channel using the Tuning Wheel (option)
Tune up and down the channel list using the Tuning Wheel . Using the
Tuning Wheel allows you to tune automatically to the next channel, without
highlighting or selecting. To activate this mode, go to “Direct Tune” option in
the menu section.
11

Delphi Roady SA10035 Specifications

General

Brand	Delphi
Model	Roady SA10035
Category	Receiver
Language	English