The supplied AC power adaptor is not water resistant. To prevent shock hazard,
avoid using the SKYFi
TM
Audio System near water during AC operation.
Water in the headphone jack may cause rusting and possible malfunction.
Unplug the AC power adaptor from the wall outlet when it is not used for an extended
period of time.
For battery operation, use six D size (R20) batteries.
When the batteries are not being used, remove them to avoid possible damage that can
be caused by battery leakage or corrosion.
The icon indicating operating voltage, power consumption, etc. is located next to the
power jack on the rear cover.
2. On placement.
Do not place the SKYFi
TM
Audio System on an inclined or unstable surface.
Do not place anything within 1/2 inch of the side of the cabinet. The audio/ventilation
ports must be unobstructed for the SKYFi
TM
Audio System to operate properly and prolong
the life of its components.
Since a strong magnet is used for the speakers, keep personal credit cards using
magnetic coding or spring-wound watches away from the unit to prevent possible damage
from the magnetic fields.
4. Do not immerse in water
This product is not meant to be immersed in water or come in continuous contact with
water.
Before opening or shutting the SKYFi
TM
Receiver cradle or battery compartment panel,
be sure to wipe off water, dust, or sand on the outside of the unit.
If the SKYFi
TM
Audio System is splashed with salt water, wipe clean with a damp cloth,
and then dry with a soft dry cloth. Do not wash under running water; do not use soap or
detergent; do not dry with an electric hair dryer.
If the SKYFi
TM
Audio System is left in a car parked in the sun, be sure to choose a
location in the car where the unit will not be subjected to the direct rays of the sun.
10
Troubleshooting
General:
1. The power is not on.
Connect the AC power adaptor to a wall outlet securely and make sure the
wall outlet has the 110V AC output.
To Next Page
Loading...
Need help?
General
