Delphi SkyFi SA10001 User Manual

11
ITEM
UNIT
SPECIFICATION
REMARK
Nominal Limited
1 W > 4 > 3.5 Rated Output (10%) at 1 KHz
Continuous
Average
power Output
2 % > 0.6 > 1.0 Output: 0.5w
Total Harmonic
Distortion
Frequency:
70Hz - 20KHz
2 % > 0.6 > 1.0 Output: 0.5w
Total Harmonic
Distortion
Frequency:
70Hz - 20KHz
3 mV 180 140 ~ 235 Line InputSensitivity
Frequency:
70Hz~20KHz
4 Hz 65 ~ 22K 70 ~ 20K -3dB
Frequency
Response
0dB: 0.775V/1KHz
5 dB >65 >60 Level 1 0db: 2.0V/1KHz
Signal To Noise
Ratio
6 dB >45 >40
Level 1 0db:
2.0V/1KHz
Channel
Separation
Input: Short
7 Ohm Frequency 1KHz
Input
Impedance
- - Normal Input
- - Floating Input
>4.7K >4.5K Line Input
8 mV 3 5 Input: ShortMax noise Ratio
9 mV 3 5 Input: ShortMax noise Ratio
9 V 7 ~ 16 7.5 ~ 15 Operation fine
Battery Power
Range
10 mm __18 3/4”_ W. ___7”__ H. ______5 5/16”_____ D.
Dimension
Make sure the batteries are inserted correctly.
Replace all the batteries with new ones if they are weak.
2. There is no audio.
Unplug the satellite radio unit (SKYFi
TM
) from the Audio System and re-insert the SKYFi
TM
unit..
3. Noise is heard coming through the Audio System.
Someone is using a portable telephone or other equipment that emits radio waves
near the antenna (~2.3GHz). To solve this problem move the portable telephone etc.,
away from the unit.
Maintenance
Specifications
To clean the cabinet panel and controls, use a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent,
such as alcohol or benzene.
Note: Unplug the AC power adaptor during the cleaning to avoid any electrical shock
hazard.

Delphi SkyFi SA10001 Specifications

General

Brand	Delphi
Model	SkyFi SA10001
Category	Stereo System
Language	English