Delphi SKYFi2 Installation Guide

10
6. Clip the SKYFi2 vehicle cradle
onto the swivel mount (figure 4).
7. Reassemble the system as in step 2.
8. Attach the antenna as explained
on page 12 and route the antenna
cable as described on page 13.
To vehicle
dashboard
Figure 4. Attach vehicle mount to back of
SKYFi2 as shown.
Figure 3. Installing the vent mount to your
vehicle’s air vent.
English Skyfi2 install guide:SKYFi2 install guide layout 9/21/2006 12:09 PM Page 11

Delphi SKYFi2 Specifications

General

Brand	Delphi
Model	SKYFi2
Category	Receiver
Language	English