1-7
Overview
Entering an Address
1. Press the power/volume knob to turn the audio and navigation system on.
2. Insert the DVD map disc into the radio CD slot.
3. A notice may appear. Touch the NEXT screen button to proceed. If the radio is already on with a map
disc inserted, push the NAV hard key.
4. Touch the DEST screen button located in the lower left corner of the map.
5. Verify that the selected Search Area is correct.
6. Touch the Address screen button.
7. Enter the street name using the alpha keypad on the screen. Do not enter directional information or
street type, and be sure to use the space symbol screen button ( ) between street or city names.
For example, the street name N. Royal Oak Rd. should be entered as royal oak. Use the back-
space ( ) screen button for misspellings.
8. Select the street name from the list by touching the screen button beside the correct street name.
9. Enter the address number using the numeric keypad on the screen. You may first have to select the
correct range for the address number, then enter the desired address and touch the OK screen
button.
10. Touch the screen button beside the correct city.
11. Touch the Enter Destination screen button. The address entry is now complete.
12. Once you begin driving you will hear an audio prompt to “Proceed to the highlighted route.” You are
now in route guidance mode.
See page 2-24 for more details.
To Next Page
Loading...
Need help?
General
